Control Splitter Box

This box enables a simple BNC access to all of the PowerMAG stimulation parameters.

All relevant signals (intensity, timing, temperature, pulse form) may thus be incorporated into a laboratory or novel test environment.

TMS Field Probe

The TMS field probe provides information (such as the field gradient) on pulses emitted by stimulation coils.

This makes it possible for the user to estimate the suitability of each coil for their specific applications.

PC Interface

The PC-Interface connects the PowerMAG stimulator to a PC while remotely controlling the stimulation. Two different variants are offered:

The PC-Interface x1 which can control one stimulating device, and the PC-Interface x4 which has four channels, enabling the control of up to 4 stimulators simultaneously (e.g. for paired coil TMS protocol).

Its USB device driver provides an open programming interface which can also be used to run complex stimulation programs.

MEP-Option, Wireless

This EMG device is a 2+1 channel wireless electrophysiological amplifier with 2 bipolar input channels and 1 trigger input channel. It has a 24 bit sampling resolution, maximizing its measurement accuracy. This device delivers clean EMG signals with strong artifact suppression. It also filters the data by using a software that incorporates no hardware filters other than anti-aliasing, so that the raw data is always available and quick recovery is ensured.

The EMG device transmits its data directly to a PC or PDA via Bluetooth®, thus optimizing the user’s mobility during the measurement. This device can be carried in a pouch on the subject’s belt and is powered by two AA batteries.

PowerUNIT

The PowerUNIT is designed to be used as a voltage transformer for various power supplies, allowing our stimulators to be used for different power supplies and frequencies around the globe (100V @ 50/60Hz; 110V, 120V, 127V, 220V @ 60 Hz).

Transport Box

The lightweight and re-usable transport box is made from aluminium and is able to significantly reduce the risk of stimulator device damage while transporting. Padded with foam material this box avoid damages even during transportation over large disdances.

Treatment Chair

Considering the comfort of the patient as the main focus, this very portable treatment chair is mounted on 4 wheels, has a short backrest and an extendable as well as removable neck roll.

Backrest and legrest are adjustable up to a relax position. The armrests can be tilted backwards for an easy entry. With hydraulic height adjustment of 51-71 cm trough levers on both sides.

Cleaning: All surfaces are made for the hygienic use in hospitals.

Vacuum Cushion

This ergoninic and non-slip cushion supports the patient´s head, stabilizing the head during stimulation and also reducing the fatigue of the patient in treatment sessions. It is equipped with a simple on-hand-valve.

Vacuum Pump

The vacuum pump compresses the vacuum cushion. It is made from plastic and therefore very light.

10-20-EEG Caps

The EEG cap printed with the 10-20-system is a simple tool which helps you correctly position or reposition the treatment coil in clinical applications. It is available in various sizes.

PowerMAG Control Software

The PowerMAG Control software enables a quick and clear treatment setup. In addition to integrated standard protocols for depression or tinnitus treatment, custom protocols can be set up very easily using the intuitive user interface.

Settings such as the individual motor threshold, stimulation protocol and the stimulation location can be assigned to individual patients and saved. Free text fields allow you to enter additional information about the patient (such as medication).

Calling up personalized settings is outstandingly helpful and time-saving during repeated therapy sessions, such as for the treatment of depression

Coil Positioning Arm

The coil positioning arm which can be fixed and released with just one locking screw enables single-handed operation. It can be installed on the trolley, the treatment chair or any other round or rectangular profiles.

rTMS Trolley

This stable trolley is designed specifically for the PowerMAG TMS system. Four large twin-swivel wheels provide a high level of mobility and smooth-running ride characteristics. It is also equipped with an integrated coil holder.

rTMS Trolley Coil Holder

When not in use, the stimulation coil can be placed in a special coil holder which is mounted at the side of the rTMS trolley.

Coil Arm Support Bar

This support bar is supplementary to the coil positioning arm, increasing its placement freedom. It can be easily mounted on the treatment chair or the rTMS trolley.

Foot Switch

The PowerMAG stimulator device can be operated by an external triggering device for convenience pulse emitting under many different conditions. This foot switch enables the user to deliver stimulation pulses just by operating the pedal. A special protection around the pedal reduces the risk of unintended pulse triggering.

Hand Switch

Having the same function as the foot switch, this switch can trigger the pulse externally. It is designed to be operated comfortably with hands.